Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
140
3.9
INPUTS (Z41 PRO AND Z41 LITE)
3.9.1
CONFIGURATION
Z41 Pro / Lite incorporates
two analogue/digital inputs
, each configurable as a:
Binary Input
, for the connection of a pushbutton or a switch/sensor.
Temperature Probe
, to connect a temperature from Zennio.
Motion Detector
, to connect a motion detector (models ZN1IO-DETEC-X and
ZN1IO-DETEC-P from Zennio).
Important
:
older models of the Zennio motion detector (e.g., ZN1IO-DETEC and
ZN1IO-DETEC-N) will not work properly with Z41 Pro / Lite
.
When
Inputs
has been activated in the General screen (see section 3.2.1), the following
drop-down lists will be available for the selection of the specific functions required.
Figure 151
Inputs
All inputs are disabled by default. Depending on the function selected for each input,
additional tabs will be included in the menu on the left.
3.9.2
BINARY INPUT
Please refer to the specific u
ser manual “
Binary Inputs
”, available in the Z41 Pro / Lite
product section, at the Zennio website (
www.zennio.com
).
3.9.3
TEMPERATURE PROBE
Please refer to the specific user manual “
Temperature Probe
”, available in the Z41 Pro
