Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
136
Please refer to section 2.3.1 for details.
3.7.3
PROGRAM CONFIGURATION
If the Program Configuration checkbox is marked in Configuration, a new tab named
Program Configuration will also be shown.
Figure 147
Program Configuration (Configuration Page)
From here it is possible to set the indicators that will be included intro the Program
Configuration window:
KNX
(individual address).
Program Version
.
In addition, for the Z41 Pro to select two other indicators will also be possible:
IP Address
.
MAC Address
.
Each indicator can be labelled on screen with a custom text (parameter
Label
).
Note
:
In Z41 COM this indicators can be set in the Device tab (see section 3.7.2)
Please refer to section 2.3.2 for details.
3.7.4
PROFILE
If the Profile checkbox is marked in Configuration, a new tab named Profile will also be
shown.
