Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
102
setting which of all the five extended modes will be included into the sequential
scrolling implemented by the buttons.
Figure 94
Extended Mode
When this type of mode control is assigned to the box, two 1-byte communication
objects are enabled: the
[Pn][Bi] Mode Control
control object, and the
[Pn][Bi]
Mode Indicator
status object. Depending on the mode selected by the user, the
control object will be sent to the bus a certain value (see Table 5), after which the
box will display the icon that corresponds to the new mode. Additionally, if the
status object receives from the bus a value that represents any of the modes, the
box will adopt the corresponding icon, while if an unrecognised value is received,
no icon will be shown.
Mode
Value sent
Heat
1 (0x01)
Cool
3 (0x03)
Auto
0 (0x00)
Fan
9 (0x09)
Dry
14 (0x0E)
Table 5
HVAC Mode vs. Object Value
Finally, the
Left Button
and
Right Button
parameters permit selecting the icon
that will be displayed inside the buttons of the box.
Note
:
a list with a
ll icons available can be found in document “Z41 Icon list”,
available at www.zennio.com
.
