Touch-MyDesign
Technical Support:
http://zennioenglish.zendesk.com
7
2
CONFIGURATION
2.1
GENERAL CONFIGURATION
Zennio Touch-MyDesign lets the user control and monitor a set of functionalities
within a domotic environment, in an easy and intuitive manner. The inexistence of a
screen, menus or complex user interaction beyond button presses confers the device a
notable ease of use.
To make the device perform the desired functions, several options need to be
parameterized, both in relation to the
general behaving
(horizontal/vertical orientation,
locking procedure of the touch panel, buzzing for action confirmation, welcome back
object…) and
button-specific
(function to be performed, behaviour of its
corresponding LED, etc.).
On the other hand, Touch-MyDesign features 2 opto-coupled inputs, each of which
may be independently configured as a
switch/sensor
, a
push-button
, a
movement
detector
, or a
temperature probe
. And depending on the selection, a series of
external elements may be connected to the input terminal of Touch-MyDesign. In the
particular case of an external temperature probe (such as model
ZN1AC-NTC68
from
Zennio), it will be possible to use it independently of the temperature sensor built-in in
the device, which implements its own communication objects and may or may not be
enabled by parameter.
2.2
TOUCH PANEL
Touch-MyDesign features
4, 6 or 8 ‘main’ capacitive buttons
(depending on the
model) at the user’s disposal for the execution of actions.
5 more ‘additional’ buttons
can be found at the bottom of the front touch panel (or at the right side of the front
touch panel, in case of mounting the device horizontally). All of them will perform
specific and permanent functionalities at any time, since functions are not grouped into
alternating menus, pages...
