Roll-ZAS
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
23
First of all, two parameters are provided to set the buttons that will be destined to
navigate through the enabled pages: the
Menu
or the
Arrow
buttons. To obtain
detailed information about page switching, please refer to section 2.3.
"
Pair Button Behaviour
" can also be found here in order to select the desired pattern
for the buttons marked as “pair buttons” across the different pages, being the available
options Left: off/decrease; Right: on/increase and, alternatively, Left: on/increase;
Right: off/decrease.
The pages that can be enabled and configured are:
Pages 1-4
,
the
Configuration
page,
the
Security
page, the
Indicators
page and the
Screensaver
. The next sections
explain in detail how to configure each of them..
Finally, parameter “
Use the Central Area of the Touch as a Binary Button
” is shown,
making it possible to enable or disable such functionality. If “Yes” is selected, a second
parameter (“Action”) will come up. This action determines whether a “0”, a “1” or an
alternating value (“Switch 0/1”) will be sent as a reaction to user presses over this
central area. This sending takes place through the “[General] Central button” specific
object.
3.3.1
PAGES 1-4
For every enabled page, up to 8 individual buttons or up to 4 pair buttons can be
enabled. According to the selected configuration, each button can perform different
functionalities, which are explained in detail below.
Note
:
the options and screenshots shown may refer to Page 1. However, they would
be analogous for pages 2-4.
Figure 16
. Page 1. Configuration
