Zennio MAXinBOX 16 Plus, Technical Documentation

Page: 1 / 2

Technical Documentation
© Zennio Avance y Tecnología S.L. Edition 1 Further information www.zennio.com
Page 1 / 2
d
MAXinBOX 16 Plus
MAXinBOX 16 Plus. Multi-Function Actuator 16 outputs 16A
ZIO-MB16P
Technical Documentation
FEATURES

8 different channels:
o
Shutter channels (up to 8).
o
Individual outputs (up to 16).
o
2-pipes Fan Coil control (up to 4 units).

Manual output operation with push button and
LED status indicator.

Suitable for capacitive loads, maximum 140 µF .

Logical functions included.

Output timing facilities.

Total data saving on power failure.

Size 90 x 60 x 140 mm (8 DIN units).

DIN rail unit assembly (EN 50022), with snap fit
clamp.

No external power supply required other than the
bus.

KNX BCU integrated.

Possibility to connect different phases in adjoining
outputs.

CE directives compliant.
6
1
4
5
7
3
2
Figure 1. MAXinBOX 16 Plus
1 . Upper outputs 2 . Lower
outputs
3 .Programming/Test
LED
4 .KNX
connector
5 .Programming/Test
button
6 .Output control
button
7 .Output status LED
indicator
Programming/test button : short button press to set
programming mode. If this button is held while plugging the
device into the KNX bus, it goes into safe mode. If this button is
held more than 3 seconds, the device goes into manual mode
(test mode).
LED: programming mode indicator (red). When the device
goes into safe mode, it blinks (red) every half second. It lights
in green when the device is in manual mode. During start up
(after reset or power failure), if the device is not in safe mode,
programming LED blinks in blue for a few seconds.
GENERAL SYSTEM SPECIFICATIONS
CONCEPT
DESCRIPTION
Type of device Electric operation control device
KNX
supply
Voltage (typical) 29VDC SELV
Voltage range 21
…31V DC
Maximum
consumption
Voltage mA mW
29VDC (typical) 11 320
24VDC 12.5 300
Starting 25 725
Bus connection Typical bus connector TP1, 0.50 mm² section
External power supply No
Ambient temperature 0ºC to +55ºC
Storage temperature -20ºC to +70ºC
Ambient humidity 5 to 95% RH (no condensation)
Storage humidity (relative) 5 to 95% RH (no condensation)
Complementary characteristics Class B
Safety class II
Operation type Continuous operation
Device action type Type 1
Electrical solicitations period Long
Type of protection IP20, clean environment
Assembly
Independent control assembly device to be mounted inside of electrical panels
with DIN rail (EN 50022).
Power failure response Data saving and relay status change according to parameterization.
Response when restarting Data recovering and output status change according to parameterization
Operation indication
Programming LED indicates programming mode (red) and test mode (green).
Output status LED indicators reflect current output state.
Weight 525 gr.
PCB CTI index 175 V
Enclosure PC FR V0 halogen free