Zennio KLIC-PA, User Manual

Page: 26 / 34

KLIC-PA
http://www.zennio.com Technical Support: http://support.zennio.com
26
In case any of the above errors is detected, the corresponding object will be
sent (with a value of “1”) to the KNX bus. Once the error is over, it the object will
be sent with a value of “0”. The object associated with each error will be,
respectively:
➢ “
[AC] Internal Error: Communication
” (1-Bit).
➢ “
[AC] Internal Error: Timeout
” (1-Bit).
In case of being in an internal error situation, control orders will be ignored by
KLIC-PA and the status will be the previous to the error activation.
•
Errors in the A/C unit : errors reported by the A/C unit itself. KLIC-PA can notify
the KNX bus about the reported error code, although referring to the specific
documentation of the A/C unit is advisable in order to obtain further information.
In case the A/C unit reports an error, the binary object “
[AC] AC Unit Error:
Active Error
” will be sent with value of “1”, while the 14-bytes object “
[AC] AC
Unit Error: Error Code
” will report the corresponding error code. Once the error
is over, both binary and 14-
byte objects will send a value of “0”. Please, refer to
the user manual of the A/C unit for details about the error codes.