Zennio KLIC-FJ, Manual

Page: 26 / 37

KLIC-FJ
https://www.zennio.com/ Technical Support: https://support.zennio.com
26
Initial sending of status : If enabled, the status objects will be sent to the KNX
bus after applying the parametrized delay (0-3600 s).
Note : even if this option is not enabled, the status objects may be sent to the
KNX bus if the initial configuration differs from the current status of the A/C
machine .
2.4.5 SCENES
The Scenes function allows defining a set of statuses (in terms of On/Off, mode, fan
speed, etc.) that KLIC-FJ will send to the A/C unit whenever it receives the corresponding
scene values from the KNX bus.
ETS PARAMETRISATION
After enabling this function (see section 2.4.1), a new tab named Scenes will be
incorporated to the tab tree. It allows setting up different scenes (up to 5), consisting
each of them in a set of orders to be sent to the A/C unit upon the reception, through the
KNX bus and by means of the
“
[AC] Scene
” object, of the corresponding scene value
(decreased by 1, according to the KNX standard).
Figure 20. A/C Gateway. Scenes.