Zennio KLIC-DA LT, User Manual, Page: 3 / 20

KLIC-DA LT
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
3
1 INTRODUCTION
1.1 KLIC-DA
KLIC-DA from Zennio is the ideal solution for the integration of Altherma climate
systems into a KNX domotic environment.
As a bidirectional KNX / Altherma interface , KLIC-DA provides full communication
between any KNX device (e.g., the InZennio Z41 touch screen from Zennio) and the
Altherma system, which can therefore be controlled analogously as from the specific
Altherma user interfaces. Moreover, any status updates and feedback received from
the Altherma system will also be forwarded by KLIC-DA towards other KNX devices.
Figure 1. KLIC-DA
Daikin Altherma is an integral solution for climate control. Although mainly based on the
heat pump
technology, Altherma systems can optionally perform cooling as well,
therefore providing the user with heating, air-conditioning and domestic hot water.
Depending on the structure of the system (e.g.: location of the external unit, integration
or not of the hydrobox within the same unit, etc.) and on whether A/C is required or not,
different Altherma systems are available.