ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
41
2.3.2.5.
PERIODICAL SENDING OF "0"
Set a period of time to cyclically send value “0” to the BUS when object
“[Switch/Sensor] Edge” detects this value on an incoming edge. If not cyclically
sending is needed, please select value “0” in this field.
2.3.2.6.
PERIODICAL SENDING OF "1"
Set a period of time to cyclically send value “1” to the BUS when object
“[Switch/Sensor] Edge” detects this value on an incoming edge. If not cyclically
sending is needed, please select value “0” in this field.
2.3.2.7.
BLOCK
By selecting “Yes” on this field, a new Communications object “Block” appears
on the ETS. This object can be used to disable an input:
¾
On receiving a “1” through this object, the panel will be
ignoring any Edge on the input.
¾
On receiving a “0” through this object, the input recovers its
enabled status, so that it is ready again to receive orders.
Actions taken on the input while being disabled will not be taken into
account.
