ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
35
¾
When setting the time, the display will send the new settings to
the BUS through its own Communication Objects.
¾
The refresh rate is 1 minute.
¾
When the display recovers from a BUS Power failure, this will
show the time it had just before the incident.
Note I: When a Power BUS failure occurs, please have on mind the
delay this implies to correct it.
Note II: There are different KNX devices on the market which can
synchronize periodically the time and date of every single device in
the installation. Such devices can be really useful when the
installation is based on any kind of Schedule programming.
Note I: Disabled boxes appear “blank” in the display
BOX
3
(Date
Setting)
To set the date in the display
To see the date in the display, users only have to press on any of
the enabled pages
“header”
. The date will be shown during 3
seconds.
Nota:
The day of the week does not appear on the display;
however, when programming the display, this is
automatically configured when setting the date
BOX
4
(Display
Contrast
Setting)
The adjustment range for this function lies between 0 and 20.
The default value is 12.
BOX
5
(Reset)
Reset button to reinitialize the device.
RESET
Set
TIME
Set
DATE
Display
Contrast
Setting
Programming
Mode
