ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
33
the “Auxiliary System” provides cool until the “Set
temperature” is reached. It is because of this that this parameter
sets the number of degrees over the “Set Temperature” we
want our “auxiliary system” to be referred.
And the Auxiliary System in this case will be providing cool to the
room until its reference temperature is reached, to leave the Main
System acting alone from that moment.
ESTADO INICIAL (al volver la tensión al BUS)
Æ
En el caso en el
que se produzca una pérdida de tensión en el BUS, se puede fijar
mediante este parámetro, el estado en el que el usuario quiere que
comience a funcionar el TERMOSTATO cuando se recupere la tensión.
Until now, when PWM or HYSTERESIS (1 bit control methods) were selected, there was no
possibility to know whether the thermostat was in the “0” or in the “1” status.
This makes users don’t know when the system is heating up and when is stopped.
To display this status, a new LED (based on 4 pixels) has been added in the upper right side of
the "ON" indicator in the first box of the Climate Page.
This new LED will blink every second when the control variable is sending a “1”.
2.2.3.
TECHNICAL ALARMS
This is a specific screen, with up to six independent boxes in charge to monitor
the BUS looking for possible warning conditions in the KNX installation (gas,
smoke...).
Every “Enabled” box on the screen has some parameterizable fields at the user’s
disposal:
NAME
Æ
This field allows a user to associate a name with the
corresponding box in the screen, (11 free characters are available to set
the name).
Auxiliary
System
Reference
(Tª)
=
“Set
Tempe
“Additional
Band”
