ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
18
2.2.1.6.
SCENE CONTROL
Scenes or “lifestyles”
consist of a synchronized activation of some
devices in the domotic installation, so that different predefined
atmospheres are generated.
There is an only Communication Object associated with
“Scenes”
. All
the scenes will be always sent through the object
“[GN] Scenes”
.
Before continuing with the parameterization of this type of control, a
small introduction to the Communication Object
“[GN] Scenes”
is
done next:
The DPT (Datapoint Type) Scene Control is a one byte Object with the
following format.
C
0 = Activate the scene corresponding the field Scene Number
≡
N
1 = Learn the scene corresponding the field Scene Number
≡
N
R
Reserved field with value “0
N
Scene Number Range [0…..63]
Note I
:
If C=0, the DPT valid range is [0….63], whereas if C=1, the DPT
valid range is [128…..191]
Note II
:
Activate Scene 1
Æ
DPT=0
Activate Scene 2
Æ
DPT=1
Activate Scene 64
Æ
DPT=63
Learn Scene 1
Æ
DPT=128
Learn Scene 2
Æ
DPT=129
..
