Zennio inBOX 24 vT, Manual

Page: 24 / 33

inBOX 24 vT / inBOX 20 vT
https://www.zennio.com Technical Support: https://support.zennio.com
24
ANNEX II. COMMUNICATION OBJECTS INBOX 24 VT
“Functional range ” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any use or have a
particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Number Size I/O Flags Data type (DPT) Functional Range Name Function
1 1 Bit C - - T - DPT_Trigger 0/1 Reset 0 Voltage Recovery -> Sending of 0
2 1 Bit C - - T - DPT_Trigger 0/1 Reset 1 Voltage Recovery -> Sending of 1
3
1 Bit I C - W - - DPT_Enable 0/1 Lock Manual Control 0 = Lock; 1 = Unlock
1 Bit I C - W - - DPT_Enable 0/1 Lock Manual Control 0 = Unlock; 1 = Lock
4 1 Bit C - - T - DPT_Trigger 0/1 [Heartbeat] Object to Send '1' Sending of '1' Periodically
5 1 Byte I C - W - - DPT_SceneControl 0-63; 128-191 [Thermostat] Scene Input Scene Value
6 2 Bytes I C - W - - DPT_Value_Temp -273.00º - 670433.28º [Tx] Temperature Source 1 External Sensor Temperature
7 2 Bytes I C - W - - DPT_Value_Temp -273.00º - 670433.28º [Tx] Temperature Source 2 External Sensor Temperature
8 2 Bytes O C R - T - DPT_Value_Temp -273.00º - 670433.28º [Tx] Effective Temperature Effective Control Temperature
9 1 Byte I C - W - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building
Protection
[Tx] Special Mode 1-Byte HVAC Mode
10
1 Bit I C - W - - DPT_Ack 0/1 [Tx] Special Mode: Comfort 0 = Nothing; 1 = Trigger
1 Bit I C - W - - DPT_Switch 0/1 [Tx] Special Mode: Comfort 0 = Off; 1 = On
11
1 Bit I C - W - - DPT_Ack 0/1 [Tx] Special Mode: Standby 0 = Nothing; 1 = Trigger
1 Bit I C - W - - DPT_Switch 0/1 [Tx] Special Mode: Standby 0 = Off; 1 = On
12
1 Bit I C - W - - DPT_Ack 0/1 [Tx] Special Mode: Economy 0 = Nothing; 1 = Trigger
1 Bit I C - W - - DPT_Switch 0/1 [Tx] Special Mode: Economy 0 = Off; 1 = On
13
1 Bit I C - W - - DPT_Ack 0/1 [Tx] Special Mode: Protection 0 = Nothing; 1 = Trigger
1 Bit I C - W - - DPT_Switch 0/1 [Tx] Special Mode: Protection 0 = Off; 1 = On
14 1 Bit I C - W - - DPT_Window_Door 0/1 [Tx] Window Status (Input) 0 = Closed; 1 = Open
15 1 Bit I C - W - - DPT_Trigger 0/1 [Tx] Comfort Prolongation 0 = Nothing; 1 = Timed Comfort
16 1 Byte O C R - T - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building
Protection
[Tx] Special Mode Status 1-Byte HVAC Mode