inBOX 24 v2 / inBOX 20 v2
Technical Support:
3
1
INTRODUCTION
1.1
inBOX 24 v2 / inBOX 20 v2
inBOX 24 v2 and inBOX 20 v2 from Zennio are two versatile KNX actuators featuring
two relay outputs (together with four analogue-digital inputs, in the case of inBOX 24
v2) and a variety of functions. Their particularly small size makes them suitable for
installation within mechanism boxes, junction boxes, roller shutter boxes or any other
location where the available space is limited.
The most outstanding features are:
2 relay outputs
, configurable as:
➢
1 shutter channel (with or without slats), or
➢
Up to 2 individual ON/OFF outputs.
4 multi-purpose inputs
(only in inBOX 24 v2), configurable as:
➢
Temperature probe, either models provided by Zennio or other NTC
temperature probes from other suppliers, being in that case possible to
configure their parameters in ETS.
➢
Binary inputs (i.e., pushbuttons, switches, sensors),
➢
Motion detectors.
10 customisable, multi-operation logic functions
.
4 independent thermostats
(only in inBOX 24 v2).
Scene-triggered action control
, with an optional delay in the execution.
Master light control
(only in inBOX 24 v2) for an easy, out-of-the-box control
of a set of luminaires (or functionally equivalent devices)
one of which acts as
a general lamp and the others as secondary lamps.
Manual operation / supervision
of the 2 or 4 relay outputs through the on-
board pushbuttons and LEDs.
Heartbeat
or periodical
“still-alive” notification.
