Zennio inBOX 20 v2, User Manual

Page: 17 / 30

inBOX 24 v2 / inBOX 20 v2
http://www.zennio.com Technical Support: http://support.zennio.com
17
Trigger Value :
sets the value (“0”, “1” or “0/1”, being the latter the default
option) that
will trigger, when received through “
[ML] Trigger
”, the master
action (the general switch-off or the courtesy switch-on).
General Switch-Off .
➢
Delay : defines a certain delay (once the trigger has been received) before
the execution of the general switch-off. The allowed range is 0 to 255
seconds.
➢
Binary Value :
if checked, object “
[ML] General Switch-off: Binary
Object
” will be enabled, which will send one “0” whenever the general
switch-off takes off.
➢
Scaling : if check
ed, object “
[ML] General Switch-off: Scaling
” will be
enabled, which will send a percentage value (configurable in “
Value
”)
whenever the general switch-off takes off.
➢
Scene :
if checked, object “
[ML] General Switch-off: Scene
” will be
enabled, which will send a scene run / save order (configurable in
“
Action
”
and “
Scene Number
”) whenever the general switch-off takes off
➢
HVAC :
if checked, object “
[ML] General Switch-off: HVAC mode
” will be
enabled, which will send an HVAC thermostat mode value (configurable in
“
Value
”, being the options “Auto”, “Comfort”, “Standby”, “Economy” and
“Building Protection”) whenever the general switch-off takes off
Note : the above options are not mutually exclusive; it is possible to send
values of different nature together .
Courtesy Switch-On :
The parameters available here are entirely analogous to those already
mentioned for General Switch-Off. However, in this case the names of the
objects start with “
[ML] Courtesy Switch-
On (…) ”. On the other hand,
sending scene save orders is not possible for the courtesy switch-on (only
orders to play scenes are allowed).
Note :
object “[ML] Courtesy Switch-On: Binary Object” sends the value “1”