DALIBOX Interface 64/32
Technical Support:
35
Note
:
linear regulation is compatible with LED modules only. In case of enabling
this option, a warning message shows up in ETS.
2.5.2
ECG M
Other than the additional functions and options for the group, some specific options will
be provided for each of the ballasts that have been enabled and assigned such group.
These options are analogous to the basic options available for ballasts with no group
assignment. Pease refer to section 2.4.1 for more details.
ETS PARAMETERISATION
When new ballasts become enabled (see section 2.2) and assigned to a group, new sub-
tabs (one per ballast) will be incorporated under the “Group N” tab, being N the number
of the group they belong to.
Figure 14.
Group N
– ECG M
The options they contain are entirely analogous to those describe in section 2.4.1 for
ballasts with no group assignment.
2.5.3
LIMITS
DALIBOX Interface 64/32 allows configuring two different limit types:
Luminosity Limits
: they limit the luminosity ranges controlled by the ballast.
These limits are not perceptible by the user, i.e., the dimming range for the
KNX bus will still be 0-100%, and the dimming time between both ends (0% to
100%) will be exactly the dimming time parameterised.
