AudioInRoom
Technical Support:
11
1.5
INICIALIZATION AND POWER TENSION
After a programming, a
Check-out
procedure is executed, which will also update the
Bluetooth module with PIN and device name values set by parameter.
With a power failure, the Bluetooth connection gets lost. This causes the source device
playback gets stopped. AudioInRoom has been designed so that audio source
playback can be recovered in a known status.
On the other hand, a KNX bus power failure
does not imply any change in the
device status since it has external power supply
. The Testing LED will red flashing
for information.
After power tension, the following status objects are sent to the KNX bus:
[Audio] On/Off (Status)
[Audio] Check-in/Check-out (Status)
[Audio][BT] Name (Status)
[Audio] Aux. Input (Status)
[Audio] Channel X: Mute (Status)
[Audio] Channel X, Subchannel A: Mute (Status)
[Audio] Channel X, Subchannel B: Mute (Status)
[Audio] Channel X: Volume Limit (Status)
[Audio] Channel X: Volume Limit Value (Status)
[Audio] Channel X: Volume (Status)
[Audio] Channel X, Subchannel A: Volume (Status)
[Audio] Channel X, Subchannel B: Volume (Status)
[Audio] Channel X: Alarm (Status)
[Audio] Alarm: Overheating (Status)
[Audio] Title of the Track
[Audio] Name of the Artist
