ALLinBOX 161
/ 88 / 46 / Hospitality
Technical Support:
9
1.4
LED INDICATORS
ALLinBOX incorporates 7 LED lights on the top of the device that make it easy to
monitor the status of the buses and to detect typical communication problems, as
detailed below.
Figure 2.
LEDs
KNX Line Status LED (TP)
: shows the status of the KNX bus.
➢
OFF: KNX line is not powered.
➢
ON (green) = KNX line is powered.
Note
:
the update of the LED status can be delayed a few seconds after the
trigger event, e.g., after the disconnection of the main power supply.
Ethernet Line Status LED (IP)
: shows the status of the Ethernet line.
➢
OFF: IP address missing, or IP line not connected.
➢
ON (green): Ethernet connection OK and IP address correctly assigned.
Power Supply Status LED (POWER)
: shows the status of the power supply.
➢
OFF: the device is not powered.
➢
ON (green): device with voltage.
➢
BLINKING (green): short circuit on the KNX bus /
“Reset” button press.
