ALLinBOX 1612 v2
Technical Support:
14
Figure 4.
Selection of ALLinBOX 1612 v2 in the Bus Connections tab in ETS.
Or by selecting it at the bottom left after opening a project in ETS.
Figure 5.
Selection of ALLinBOX 1612 v2 in a ETS project.
Important
:
If the ALLinBOX 1612 v2 is selected as the programming interface to
program itself it is recommended to first perform individual address download and
then application download, rather than complete download (complete download
causes a device restart and therefore communication with ETS is lost and the
download is cancelled).
2.2.1
PARALLEL DOWNLOADS
ETS offers the option to perform multiple parallel downloads within the same project.
This option is only available for connections via a KNX-IP router or a KNX-IP interface.
Certain conditions must be met:
Each download must be performed on a different line.
For each line, it is necessary to select one
ALLinBOX 1612 v2
to perform the
download.
