Zenith VN1ANIUTA50, Manual

Page: 1 / 2

zenit�
®
Indoor Ultra Thin Amplified
HDTV
Antenna
Multi-Directional - adjustment free
Receives local HD and Digital lV broadcast signals for free
Receives 1080p, 1080i or 720p programming when transmitted
Recommended for customers that live within 50 miles of
broadcasting towers
Installation
In-line Amplifier
This antenna is designed for an HDTV equipped with an internal QAM tuner or an analog lV
with a digital converter box.
Uncoil the 3 meter coaxial cable to determine the likely mounting position of the antenna.
Digital to Analog Converter
VN1ANIUTASO
ii
l4KI
.....
..,
Status
(":;\
Connect to HDTV
(i\
\!..) -
Locate the threaded RF coaxial female
OR
\f;j
connector on the television. This is typically
Locate the threaded RF coaxial female connector on the
converter box labeled "Cable In" or "Ant In".
®
©
®
®
labeled "DlV /TV" or "Cable/ Antenna".
Attach the antenna coaxial cable by finger
tightening the male F connector.
-a'fh.. �
"OTVITV"o,
�
\'f!,JJ),,/,IJ
"Cable/Antenna"
Install AGDC Adapter
Attach the antenna coaxial cable by finger tightening the
male F connector. The other RF connector on the converter
box is the output to the lV. Connect a coax cable (not
provided) between the converter box and the lV.
�cableln"or�Antln" To TV
- Connect the DC plug of the AC/DC adapter into the in-line amplifier of the antenna. Plug the AC/DC adapter into a 11 0V AC
receptacle. Verify the red LED on the in-line amplifier is illuminated.
Position Antenna
- Position the antenna in the desired location. Before using the provided mounting pads, it is advisable to temporarily tape the
antenna in place until after the next step.
Scan for Channels
Using the television menu, select the appropriate input and initiate an automatic channel scan. Once complete, the received
channels can be selected via the up and down channel buttons on the lV's remote control. If you have not received the
expected channels, reposition the antenna and repeat the channel scan.
Mount Antenna
- Using the provided adhesive pads, mount the antenna in the final position that has resulted in the reception of the most
channels.
Helpful Tips:
Maximize the number of channels you receive by testing the antenna in several locations before mounting.
Be sure to repeat the channel scan on your lV each time to find optimal reception
If possible, mount antenna as high as possible or near a window for best results
ra
-�"'�-�-w,
L:J I L:J determine what DTV signals are available in your
._ location
• https://www.fcc.gov/medi&'engineerif9dtvmaps
[!l ..
Frequency Range: VHF: 4 7 - 230 MHz; UHF: 470 - 862 MHz
Gain:
28 d8
Output Level:
100 dBuV Max
Noise Figure:
� 3 dB
Power Supply:
via AC/DC adapter (DC12V/50mA)
Zenith is a registered trademark of Zenith Electronics LLC and used under license.
Zenith est une marque de commerce deposee de Zenith Electronics LLC et utilisee sous licence.
Zenith es una marca registracla de Zenith Electronics LLC y se utiliza bajo licencia.
www.amertac.com
Mode
In Chino /
Fabrlque
en Chine /
Fabrfcado en China
©2017 Amerlac'"
117-0032-A