12
A100K11422
Flowire Converter Configuration Manual
4 Mounting & Recommendations
4.1 Mounting the Flowire Converter
The Flowire Converter should be mounted on-wall by using 2 x 4 mm screws or on NS35 DIN rail by
using the mounting clips provided in a normal and ventilated indoor environment with a temperature
of maximum 55ºC. Make sure that there is sufficient space for cables and maintenance. When using
more than one Flowire Converter, try to mount them as far apart as possible.
Figure 9 Flowire Converter Dimensions
1
2
3
4
Alternate DIN Clip Holes
3
DIN Mounting Clip
1
Mounting Holes
2
DIN Mounting Clip
4
Figure 10 DIN Mounting Clips
To mount the Flowire Converter:
● Press the Flowire Converter against the DIN rail of the rack until the mounting clips snap into
place.
24VDC
1008080210
non-PoE
.
FCDC2
