16
User Manual
8300 MkII Sound Reception System
4.3 Electrical Connections
The cable from the P-8301 MkII microphone unit is a 3-meter cable with flying leads and must be wired to a junction box suited
to the environment it is placed in. A cable from the junction box must be laid to the P-8300 MkII display unit. When connecting
the microphone unit to the display unit, the cable must be terminated in the 11-pin microphone connector on the back of the
display unit.
The cable must be shielded and contain at least 5 twisted pairs made of bare copper and have a lead core size of 0.25 mm
2
or
larger when the cable length is up to 100 meters. If a longer stretch of cable is required (up to a maximum of 200 meters), use
a lead core size of 0.5 mm
2
or larger.
Figure 15: 8300 MkII system electrical connections
