15
User Manual
8300 MkII Sound Reception System
2: Fasten the unit to the bridge console
4.2 P-8300 MkII Display Unit
IMPORTANT:
Prior to fastening the unit to a console, connect both the power and microphone unit connectors.
1: Put the 4 screws in place
3: Secure the frame in place
The display unit should be installed such that
incoming sound signals can be heard at all
positions inside the bridge and is visible from
the conning position.
Advanced configuration options can be done
using the web interface.
Figure 14: 8300 MkII dimensions
(screw hole positioning)
To mount the P-8300 MkII Display Unit:
1. Find the appropriate location for mounting (bridge or similar structure).
2. Degrease the console.
3. Connect the power.
4. If applicable, attach the P-8301 MkII interface.
5. If applicable, plug in the Ethernet cable.
6. If applicable, attach the mute closing contact to the foghorn system.
(This contact suppresses detection when the contact is closed)
7. Insert the unit into the console.
(Remove the protective layer on the gasket prior to insertion)
8. Fasten all four screws, one in each corner.
9. Secure the frame to the unit
CAUTION:
Overtightening the screws may cause damage to the plastic frame.
