ICX 500 Gateway
Doc.no.A100K12202
Page 68
Mode
: Select the
ICX-AlphaCom
radio-button.
Product Model and Accessory
: Verify the product model is set correctly and select any
additional accessory if available for this device.
Registration Settings:
•
ICX-AlphaCom IP-address
: Enter the IP address of the ICX-AlphaCom server to
which the IP station is to be registered
•
Directory Number
: Enter the directory number of the station. This must match the
directory number defined in the ICX-AlphaCom server
-
If a directory number is not entered, the station will register with its MAC address.
The MAC address is found on the Station Information page and needs to be
entered in the ICX-AlphaCom server using the AlphaPro PC tool
IP Settings:
•
DHCP
– Select this option if the IP station shall receive IP Settings from a DHCP
server.
•
Static IP
– Select this option if the IP station shall use a static IP address. Enter values
for:
o
IP-address
o
Subnet-mask
o
Gateway
Click
Save
followed by
Apply
to apply the new configuration settings
5.2.2. Configuration of the ICX-AlphaCom server
5.2.2.1. AlphaPro Configuration
The station is defined in
Users & Stations
window,
General
tab. For minimum configuration you
need enter these fields:
•
Directory Number
- must match the directory number configured in the IP station itself
•
Display Text
- Any free text. Used as Caller ID.
•
Station Type
- Set to
Substation
unless the station has full keypad 0-9. If full keypad, set
Master Station
