ICX 500 Gateway
Doc.no.A100K12202
Page 43
3.4. System Maintenance
3.4.1. System Recovery
From the
System Maintenance > System Recovery
menu one has the following options:
•
Small Reset
: Reset main applications
•
Reboot
: Reboots the complete system
•
Chilly Restart
: Reset main applications and clear state data like mails, call forwarding,
absence status, UDDs and audio program selection. Configuration data is kept.
•
Load Factory Default
: Reset intercom configuration data to factory defaults. All IP
settings are kept.
•
Clean & Factory Defaults
: Reset intercom configuration data to factory defaults.
Removes license file, log files and backup files. IP settings are kept.
•
Rollback
: The ICX-500 has two memory partitions. When upgrading the software, the
partition which is not currently in use will be updated. When the update is finished, the
ICX-500 will restart using the updated partition. If for some reason the newly updated
partition doesn’t work perfectly, it is possible to roll back to other partition.
Note
: In
System Monitoring > System Information
you can see which partition is
currently active (A or B).
System
Recovery options
3.4.2. System Upgrade
From
System Maintenance > System Upgrade
one can upload new software to the system.
•
Download the software image file, e.g.
vsfx-1.2.3.6.swu
. This file is a complete image and
includes both the Linux OS and all applications.
