ICX 500 Gateway
Doc.no.A100K12202
Page 100
Call
prefix 0, then the phone number
7.3. Optional configuration
7.3.1. Incoming Calls - Force Private Ringing mode
Incoming calls from the SIP Trunk can be forced to be in private ringing mode, independent of the
private/open switch of the intercom station.
Check the flag
Incoming calls from SIP in private ringing mode
in AlphaPro
(Exchange &
System > System > VoIP).
Calls from SIP trunk will be in Private Ringing mode
7.3.2. Incoming Calls - Selective dialling
An incoming call from a SIP trunk can be routed to a "Short Number". A dial tone will be heard,
and the caller can dial any intercom number, or he can wait a pre-set time and get connected to
a pre-programmed intercom number.
