5
9. Never insert any objects into the battery
charger’s air vents. Electric shock or
damage to the battery charger may result.
10. When inserting the bit into the keyless
chuck, tighten the sleeve. If the sleeve is
not tightened, the bit may fall and cause
bodily injury.
description
1
5
4
3
2
6
1. Clutch dial
2. On\Off switch
3. Battery
4. Direction selector
5. Shift knob
6. Diode light
technical specifications
Model
CD-14 M profi li-ion
Voltage
14,4 V
Battery capacity
1500 mAh
Charging time
1 hour
Speed
0-400/0-1200 rpm
Chuck size
10 mm
Maximum torque
22.0 Nm
applications
Drilling of bricks, screwing and
unscrewing of screws and bolts. Drilling
of various metals and wood.
Battery installation and
removal
1. How to remove the battery
Hold the handle firmly and press the
battery letch for the battery removal.
CAUTION
Never short-circuit the battery.
2. How to install the battery
Install the battery, observing the polarity.
charGinG method
NOTE
After making the purchase you get a
discharge battery. Recharge it before
the first use. Make sure the voltage on
the charger matches the voltage on the
battery.
Battery charger is designed for Li-ion
batteries only. Do not use other charging
devices.
Li-ion battery doesn’t have a memory
effect and is protected from voltage lose.
CAUTION
Do not switch on the cordless drill if the
battery is discharged.
Do not exhaust the battery completely.
Before using the cordless drill charge the
battery.
1. Connect the charger’s power cord into
a receptacle. When the power cord is
connected, the charger’s pilot lamp will
blink in red. (At 1-second intervals).
2. Insert the battery into the charger. Firmly
insert the battery into the charger until the
line is visible and check the polarity.
