2
1
44
Z-R1030
MOUNTING
N
OT
E
:
Installation or servicing of the pla
y
er shall be attempted b
y
persons with experience in
electronic e
q
uipment and automotive accessories.
1. Attach the metal mounting plate to
the roof using the ST4.2 x 16 mm screws.
N
OT
E
:
Do not cover the original dome light
opening.
2. Remove the cover of the
LED dome lights to get access
to the mounting holes.
3. Place the rubber on the pla
y
er.
4. Pull out the original dome light power
wire and signal/power cable through
the original dome light opening.
8 Screws ST4.2 x 16 mm
Vehicle roof
4 Screws
PM4 x 12 mm
Vehicle roof