50
2. In the Navigation menu, tap
.
3. The first line from the bottom is the start of the route, normally the current GPS
position. Tap
, select
, and confirm your action
at the warning message.
4. The Change Start to... screen appears. Select the starting point of the route the same
way you select a destination.
5. You can see the new starting point on the map. Tap
and the
Multipoint Route screen appears where you can continue adding a destination to your
route.
6. Tap to continue. The route will be saved with the starting point that you have just set.
You can use the saved route later to plan a route. (See page 44.)
3.4.2 Adding an additional destination
If you already have a planned route and you select a new destination as described in the
above sections, the route to the previous destination is deleted and a new route is calculated.
To add a new intermediate destination to the planned route, perform one of the following
actions:
•
Tap the map anywhere to browse it. After selecting the location on the map, tap
and
to add the selected location to your route as an intermediate
destination. The other destinations of the route remain intact.
