ZENEC Prime Z-EMAP66 Series User Manual Download

Page: 56 / 82

3. Tap

4. (optional) Using the keyboard, you can change the name offered for the Saved

Location.

5. Tap

to save the location.

To add your home and work address to the saved locations, perform the following steps:

1. On the Navigation view, tap

, and

2. Tap

. Tap

to confirm

your selection.

3. You can search for the address as described on page 24.

Planning a route to one of the saved locations is described on page 39.

3.5.1 Editing a saved location

To edit a location that you have already added as a Saved Location, perform the following

steps:

1. On the Navigation view, tap

, and

2. The list of Saved locations is displayed.

3. Tap

and

4. Tap the location you want to edit, tap

and enter the name of the

location on the keyboard, then tap

Summary of Contents for Prime Z-EMAP66 Series


















































































Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands

ZENEC Prime Z-EMAP66 Series, User Manual

Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands