ZENDEX HOT SPOT HS2020 Safety And Operating Instructions Download Page 1

3

9

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

WARNING:

   ALWAYS wear protective clothing, eye, 

face and hand protection when media blasting.

   ALWAYS disconnect HotSpot™ from Speed 

Blaster® before installing Blast Cones.  Accidentally 

Depressing trigger will initiate media blast spray.

   DO NOT aim media blast spray at self or at 

others.  Particles travel at very high speed and can 

cause serious injury upon skin contact.  Eye contact 

may cause blindness.

   DO NOT use HotSpot™ without Blast Cone 

attached.

   DO NOT use HotSpot™ unless Blast Cone 

is making an air tight seal to work piece to be blasted.  

Failure to do so will allow particles to escape 

uncontrollably causing possible injury.

   Replace worn or damaged Blast Cones 

immediately.  Worn or damaged Blast Cones will not 

allow an air tight seal to work piece.  Blast media can 

then escape which may cause serious injury . . . 

(Blast Cones are wear items and through normal use 

may require replacement.)

IMPORTANT

LIMITED 2-YEAR WARRANTY

5

HOT SPOT™ 

SAFETY AND 

OPERATING INSTRUCTIONS

TM

Model HS2020 Parts Identification

ITEM PART #

DESCRIPTION

1.

HS-1

MIXING CHAMBER

2.

HS-2

MEDIA RECLAIMER BAG

3.

HS-3

RECLAIMER BAG FASTENER

4.

HS-4

BLAST NOZZLE INSERT

5.

HS-5

CHROME RETAINER RING

6.

HS-6

INSIDE ANGLE CONE

7.

HS-7

OUTSIDE ANGLE CONE

8.

HS-8

LARGE SPOT CONE

9.

HS-9

SMALL SPOT CONE

7

4

Part # 4025-HS2020

Revised 01/22

The HotSpot™ accessory you have purchased is warranted to be 

free of defects in material and workmanship under normal use for a 

period of two years from the date of purchase.

Any product or component determined by Zendex Tool to be 

defective, due to normal use will be repaired or replaced free of 

charge during warranty period and returned shipping prepaid.

To Register your product Please visit 

https://zendextool.com/warranty-registration/ 

To File a Warranty Claim, Please visit :

https://zendextool.com/warranty-claim-form/  

Once a claim is submitted, you will receive an email notification with 

your reference number (RMA).  We will then contact you within 72 

hours with next steps.  Please note, sending back an item without 

first submitting a claim may significantly delay your claims process.

4 Larson Drive ● Danbury, CT 06810 ● 

Phone: 1-800-446-5257 

E-Mail: [email protected]

Replacement Parts: ZendexTool.com

6

8

1

2

Reviews: