Dimensions
Mounting options
Independently mounted control for surface mounting
Mounting centres
470 / 150 mm
Dimensions
197 / 500 / 57 mm
Product range
Order code
Description
zc-blind
Full feature blind controller
Installation
Remove the product from the box and inspect it for any damage. If you
believe the product to be damaged or otherwise unsound,
do not
install
the product. Please pack it back into its box and return it to the place of
purchase for replacement.
If the product is satisfactory, proceed with the installation:
1
Ensure safety warnings are adhered to
.
2
Mount the unit as shown in
fig 1
or
fig 2
using the appropriate
fasteners (not included).
3
Wire terminal I/O and secure using provided cable clamps or M20
cable glands as per the wiring diagram in
fig 3.
4
Connect starter leads to output channels
per wiring diagram in
fig 4-6.
1
Safety information
■
This product must only be installed by a licensed electrician.
■
Before commencing installation or servicing turn off and isolate all
supply circuits.
■
Risk of accidental contact with live parts. Do not energise with product
open or disassembled.
■
There are no user serviceable parts, attempting to service any part of the
product will void the warranty
■
DALI is not SELV and as such should be treated as LV.
■
As the installer, it is your responsibility to ensure you comply to all
relevant building and safety codes. Refer to application standards for the
relevant rules.
■
When the installation is complete, leave this manual with the building’s
owner for future reference.
■
Each circuit must be protected by a MCB rated at 16 A or less
Blind controller
zc-blind
Surface mount
2
Rod mount
Up to 15 mm
threaded rod
M6 fastener
x4
x4
Specifications
Supply voltage
230 V ~ 50 Hz
DALI supply current
235 mA
Output rating
Maximum 250 mA
Guaranteed supply 235 mA
Terminal capacity
Mains 1 - 4 mm
2
Digital I/0 0.5 - 2.5 mm
2
Lighting circuits
3
Load per circuit
10 A
Motor channels
4
Load per channel
375 W /
1
/
2
HP
1.6 A inductive load
Operating temperature
0 to 45°C
Material
PC
Classification
Class I
197
500
57
57
470
150
170 mm
= 3 - 5 core
Recommended cable clearance
200 mm
= 6 core