Zen Underwater WA-100-EP Pen
Dome
Congratulations on the purchase of your new dome! The Pen Dome solves a critical need for
Olympus E-PL1 shooters that desire a true wide angle field of view. The Pen Dome is
constructed from the finest quality optical glass that is multicoated to eliminate flare and
reflections. All aluminum parts are hard anodized, making them rugged and impervious to
corrosion.
Care & Feeding
After diving, the entire system should be soaked in fresh water to dissolve any salt crystals that
may have accumulated. Blot any water droplets off of the dome after rinsing with a soft terry
towel or chamois, and allow to air dry. Water droplets left on the lens can etch the coating in
direct sunlight.
When cleaning the glass, use only a microfiber cloth. Do not use any cleaning solutions!
It is recommended that the port sealing o-rings be replaced annually.
Installation
The PT-EP01 Housing Port attachment is very similar to the bayonets used in many digital SLR
housing systems.
To remove the PT-EP01 Flat Port
1. Open the housing.
2. Locate and remove the Phillips screw
that holds the port locking clip in place.
3. Grasp the port and rotate 90 degrees
clockwise (when viewed from the front of
the housing).
4. Pull the port straight out of the housing.
