© 2020 Zen-Me Labs Ltd. Zen-Me is patented and trademark of Zen-Me Labs Ltd.
PAGE 8
Pairing the Sensor
When prompted by the Zen-Me App, turn on the sensor to start pairing. Follow the instructions on the App.
Turn on the sensor by pressing the Power Button.
3 flashes indicate the sensor is turned on.
Repeated flashes at one second intervals indicate the sensor is ready
for pairing.
If the sensor has not paired after 60 seconds, it turns off
automatically.
Turning on the Sensor
Press the Power Button.
3 flashes indicate power is turned on.
