VISUSCOUT 100-GA-GB-031219
18
message: “Active folder is empty. Cannot create a new folder”. Take an image
and try to update the camera again.
Basic use – starting up, shutting down and taking an image
Device is powered on by pressing left soft key.
It is possible to capture both still images and video. Image capture mode is
changed from camera menu that opens by pressing right soft key for 1s.
Still image
-
Manual focus; Still image is captured using the dual action shutter to
the second position. Use this mode in case patient’s refractive error
is known. For inexperienced users this mode is recommended.
-
AF assist; In this mode the camera takes the image automatically
when in focus. Still image is captured by using the dual action shutter
either to the first or second position. This mode is recommended for
trained users who are skilled in the focusing procedure or for use with
the optional slit lamp adapter.
-
Auto focus; Still image is captured using the dual action shutter to
the second position. Use this mode in case the patient’s refractive
error is not known.
Video recording
In order to record video camera has to be set for video imaging. Video is
captured by keeping the dual action shutter pressed down in the second
position. It is recommended to use mydriasis when capturing videos.
Taken image will stay on display until it is cleared by pressing right / left soft key
or shutter button. Image can be zoomed in instant preview by pressing middle
key. There are 4 zoom levels. Pressing middle key activates the next level. Move
around the image by using navigation key.
To transfer images to a PC via USB connection, place device to the cradle. The
image transfer and charging are indicated with green and blue LED-lights, and
text on LCD-screen (for 15 seconds). When VISUSCOUT 100 Client is open,
images are transferred to the PC automatically via USB or WIFI connection if the
automatic image transfer is enabled from Client settings.
If images are corrupted or not transferred to the PC, the original
images are saved to the memory card. The device will try to transfer
the images again, but if it fails repeatedly restart the device and/or
VISUSCOUT 100 Client.
VISUSCOUT 100 verifies if image data is erased when:
•
Device is powered on from power off mode
•
Device is removed from the cradle
It is recommended that image data storage is always erased between patients if
the images have been transferred to workstation.
Summary of Contents for VISUSCOUT 100
Page 1: ...VISUSCOUT 100 Mobile Retinal Camera User Manual...
Page 2: ...VISUSCOUT 100 GA GB 031219...
Page 57: ...VISUSCOUT 100 GA GB 031219 55...
Page 59: ......
