Zeiss VISULAS YAG III, User Manual

Page: 55 / 126

Installation
000000-1272-175-GA-GB-060613
49
1 VISULAS Trion laser console
2 VISULAS YAG III laser console
3 Instrument table
Fig. 18 Instrument table with VISULAS Trion Combi laser console
•
Place the foot switch (standard or ACCENTO foot switch) in a suitable
position under the table. The plug of the standard foot switch must be
inserted into the socket marked "Foot 1" (4, Fig. 19), the ACCENTO foot
switch into the socket on the VISULAS Trion marked "Foot 2" (5, Fig. 19).
•
For combined operation the VISULAS YAG III must be connected by a
special combi cable to the VISULAS Trion. For this purpose insert the end
of the cable with the single plug into the 532s socket on the YAG III laser
console (4, Fig. 8). Insert the larger of the two plugs at the other end of
the combi cable into the socket in the slit lamp (1, Fig. 19) on the
VISULAS Trion, the smaller plug into the Combi socket of the
VISULAS YAG III YAG (2, Fig. 19).
•
Connect the remaining mains and instrument cables according to the user
manuals for the individual instruments.
•
Close the cover of the terminal connecting strip of the VISULAS Trion.