Zeiss VISULAS green, Manual

Page: 63 / 116

Documentation set 7 Software description
VISULAS green 7.5 “Treat” work step
000000-2096-101-DokS-GB-181218 63 / 116
Item Icon/Name Explanation
9
Add further linear (for ) or arc-shaped (for ) spot
sequences.
10 Reduce the number of laser spots per line.
11 Increase the number of laser spots per line.
7.5 “Treat” work step
In the "Treat" work step information on the current treatment is
displayed. The laser is active. Once all parameters have been set,
the laser beam can be released with the manual or foot trigger.
7.5.1 Single-spot mode
1
2
3
4 5 6 7
13
12 11
9
8
10
Figure 20: “Treat” work step in Single-spot mode
Item Icon/Name Explanation
1
Power
Adjust laser power. The laser power can be adjusted using the
rotary knob, tapping the two arrow keys or with a circular
motion on the displayed arc.
2
Contact lens
Select a contact lens from the drop-down list. Some contact
lenses have already been factory set. Further contact lenses may
be added under "Settings".