Zeiss S100, Instructions For Use Manual

Page: 183 / 278

Version 9.0
G-30-1781-en
Page 183
S100 / OPMI pico Operation
Image
In the "Image" tab you can set the display configurations.
Fig. 82: Image
1 Zoom
In "Zoom" you can set the camera's zoom level between 1.0x and 2.0x in
increments of 0.1.
2 Layout
In "Orientation" you can set the screen orientation.
3 White balance
With "Start white balance" and the <white bal> key you can start white
balancing.
In the white balancing procedure, the system adjusts the video signal so that
white areas in the surgical field also appear white on the video image.
• Switch off the color filter and point the surgical microscope to a suitable
white object (e.g. a sheet of white paper with a matte surface).
• Carry out the white balance procedure using a medium brightness level.
• Press the "Start white balance" key or the <white bal> button.

If the white balancing was concluded successfully, a message appears.
• Enter "OK" to confirm the notification.
1 2
3
Standard Standard
Mirror Mirror the image vertically
Tilting Flip the image horizontally
Rotate Rotate the image 180°