Zeiss S100, Instructions For Use Manual

Page: 155 / 278

Version 9.0
G-30-1781-en
Page 155
S100 / OPMI pico Operation
HDTV submenu
The "HDTV MODE" sub menu allows you to select the video camera's input
signal and adjust it to your display device.
720P Select this setting if your display device is 720p compatible. This mode is
similar to the 1080p progressive standard, but its maximum resolution is only
1280 x 720 pixels.
1080P* Select this setting if your display device is 1080p compatible. The image is set
up using real full frames. This prevents any interline flicker, and the image is
sharply defined and stable. The maximum resolution is 1920 x 1080 pixels.
1080I* Use the 1080i (interlace) mode if your display device supports the 1080i
standard. The image is set up by two consecutive half images. The delayed
image setup can cause slight interline flicker. The maximum resolution is
1920 x 1080 pixels.
As a requirement, you should have connected the HD compatible OPMI
pico with a 1080p version and a 1080p or 1080i compatible display device.
We recommend the use of a 1080p compatible display device.