Zeiss S100, Instructions For Use Manual

Page: 151 / 278

Version 9.0
G-30-1781-en
Page 151
S100 / OPMI pico Operation
SERVICE submenu
You can set the settings that are seldom used in the "SERVICE MENU"
submenu. Proceed as follows to make changes:
• Press the <Config> key to go to the configuration menu.
• In the Configuration menu use the control keys to select the menu item
"SERVICE MENU" and press <Enter>.

The following menu appears:
• Use the control keys to select a function.

The selected function is displayed with an arrow.
• Pressing the <enter> key displays the corresponding submenu, which
sometimes contains informational text. The current setting is selected
as the initial setting in the relevant submenu.
• You can use the <CANCEL> menu item to exit a submenu. However,
any changes you may have made will not be saved.
REMOTE SETUP You can configure the device in this sub menu so that a selected function
(please refer to REMOTE FUNCTION) is controllable via a foot switch or
a fundus imaging system. The sub menu contains the following areas:
– REMOTE FUNCTION
– SWITCHING MODE
– AUDIO CONFIRMATION
You can assign one of the functions described below to the integrated HD
video camera under "REMOTE FUNCTION". This function is then triggered
when the foot switch is activated or by swiveling in and out of a fundus
imaging system.
SERVICE MENU

REMOTE SETUP ...
FACTORY SETTINGS ...
VERSION INFO ...
BACK TO CONFIG