Zeiss S100, Instructions For Use Manual

Page: 138 / 278

Operation S100 / OPMI pico
Version 9.0
Page 138 G-30-1781-en
User submenu
The "USER SELECTION" submenu enables you to choose between four
different user profiles: USER1, USER2, USER3, USER4
The user names and their configuration depend on the selected application.
The latter can be selected as required when switching on the device for the
first time and can be subsequently changed at any time.
– The "OPHTHALMOLOGY" application has the "POSTERIOR" user instead
of USER 1 and the "ANTERIOR" user instead of USER 2.
– The "DENTISTRY" application features the "ENDODONTY" user instead of
USER 1 and the "TREATMENT" user instead of USER 2.
– The Anterior, Posterior, Endodonty and Treatment users have optimized
settings.
– The video image is displayed in its unaltered condition (standard) for the
Anterior user.
– The video image is rotated 180°(ROTATE) for the Posterior user.
– The video image is displayed in its unaltered condition (standard) for the
Endodonty user.
– The video image is displayed in its unaltered condition (standard) for the
Treatment user.
The white balance is user-specific. Thus it is possible for different white
balance values to be saved e.g. for User 1 and User 2. After a change of user,
the white balance values for the new user are loaded. This requires that the
light source is also changed because otherwise, the colors would be distorted.
Therefore, white balancing should always be carried out with the light source
to be used for the particular user.
CAUTION Not for ophthalmic examinations!
• The S100 / OPMI pico must not be used for ophthalmological procedures!