Zeiss S100, Instructions For Use Manual

Page: 137 / 278

Version 9.0
G-30-1781-en
Page 137
S100 / OPMI pico Operation
Opening the configuration menu (config)
The configuration menu allows you to make user-specific settings, such as
selecting a user or setting the brightness / color saturation.
• Press the <config> key to go to the configuration menu.

The following menu appears on the monitor:
• Use the control keys to select a function.

The selected function is displayed with an arrow.
• Use the control keys to change the. settings.
If you need more information on a menu item, you can open the
corresponding sub menu by pressing the <enter> key. This sub menu
provides additional information on the setting options. The current setting
is highlighted as the initial setting in this sub menu.
• You can exit the configuration menu by selecting menu item "Exit" or by
pressing the <Config> or <live> key. If changes have been made, a prompt
is displayed for each user on exit from the configuration menu as to
whether the settings should be saved. Answer this prompt with "YES"
or "NO".
An existing "freeze" state ends when the configuration menu is activated.
USER MENU STANDARD

USER User 1 - 4
Brightness AUTOMATIC - LOW AUTO -
MANUAL
LIGHT METER SMALL SPOT - LARGE SPOT -
INTEGRAL
ORIENTATION STANDARD - MIRROR - FLIP -
ROTATE
ADVANCED ...
SERVICE MENU ...
EXIT