Zeiss S100, Instructions For Use Manual

Page: 112 / 278

Preparations for use S100 / OPMI pico
Version 9.0
Page 112 G-30-1781-en
Connecting the video connections
• Connect the required video components using the video cable.
• Check the camera and monitor function. After switching the device on,
a color bar pattern is briefly displayed for checking the color setting,
brightness and geometry.
If the color bar pattern is permanently shown, the camera head is not
connected to the video unit, or is unplugged or defective.
Examples of possible connections
1 External video monitor
2 Integrated video control unit
3 External video recorder
Fig. 59: Examples - possible
BNC (FBAS) connections)
(for an integrated HD
video camera)
In the HD video control unit the video signal is scaled down in the SD video
output (FBAS VIDEO OUT) for SD devices.
Fig. 60: Examples - possible
HDMI connections
(only for an integrated
HD video camera)
75 Ohm
ON
75 Ohm
ON
ON
1
1
2
2
3
FBAS
FBAS
OFF
75 Ohm
OFF
OFF
VIDEO IN
VIDEO OUT
FBAS
FBAS
VIDEO IN
VIDEO OUT
FBAS
FBAS
VIDEO IN
VIDEO OUT
1
2
HDMI
HDMI
VIDEO IN
VIDEO OUT
HDMI
HDMI
VIDEO IN
VIDEO OUT
3
1
2
HDMI
HDMI
VIDEO IN
VIDEO OUT
1
2
DVI
DVI
VIDEO IN
VIDEO OUT
HDMI
HDMI
VIDEO IN
VIDEO OUT
3