Zeiss S100, Instructions For Use Manual

Page: 10 / 278

Safety measures S100 / OPMI pico
Version 9.0
Page 10 G-30-1781-en
magnification and light intensity are manually controlled by the physician or
the surgeon during treatment or surgery.
A video player is connected to the system for educational purposes or to
visualize the progress of the treatment / surgery.
After the procedure /
operation
The physician or the surgeon swings the surgical microscope from the
treatment or surgical area into its standby position.
The S100 / OPMI pico can be cleaned and disinfected.
Disposal:
For the disposal of electrical and electronic devices, please observe the
relevant national legislation and other regulations applicable in your country.
Notes for the operator
Correct operation of the device is required to ensure safe use,
• so please familiarize yourself thoroughly with these Instructions for
Use before starting up the instrument.
• Please comply with the Instructions for Use of the other system
components as well. You can obtain additional information from
ZEISS Service.
CAUTION Injury to the patient's eye!
• The S100 / OPMI pico must not be used for ophthalmological procedures!
• Make sure that no light enters the patient's eyes.
CAUTION Live video images and recorded video sequences, video clips (cut sequences)
and single images must not be used for diagnosis purposes. Visualized
images may contain variations in shape, contrast and color.