Zeiss S100/OPMI pico, Instructions For Use Manual, Page: 99 / 278

Version 7.0
G-30-1781-en
Page 99
S100 / OPMI pico Preparations for use
Connecting an endoscope camera
If you want to equip the surgical microscope with an endoscope camera,
please observe the requirements for system expansions, see Page 251.
Prerequisites  Your OPMI pico has been equipped with the "Endoport" accessory com-
ponent:
 Your endoscope camera, including adapter, does not weigh more than
1.0 kg.
• Focus the endoscope camera at infinity.
The procedure of focusing the endoscope camera at infinity is a camera-
specific procedure and differs from camera type to camera type.
Microscope settings such as the focusing of the eyepieces do not affect
the endoscope port.
• Remove the cover from the endoscope port.
• Attach your endoscope camera to the endoscope port and allow the
quick-action lock to snap in.
• Connect the video cable of the endoscope camera to the endoscope sys-
tem. Please also observe the information contained in the user's manual
on the endoscope system.
• Adjust the orientation of the image on the video monitor. To achieve this,
turn the endoscope camera in the endoscope port as required.
Fig. 50: Connecting an endo-
scope camera