Zeiss S100/OPMI pico, Instructions For Use Manual

Page: 66 / 278

System Overview S100 / OPMI pico
Version 7.0
Page 66 G-30-1781-en
S100 Suspension Systems
1 Carrier arm
2 Suspension arm
The suspension arm is equipped with a switch. This switch activates the
light source when the suspension arm is moved into its working position.
The light source is switched off in the upper rest position.
3 Mobility adjustment screw
You are able to set the lifting mobility of the suspension arm with the ad-
justment screw after the successful balance setting of the microscope
equipment.
4 Mobility adjustment screw
Use this screw to set the mobility of the coupling's rotation.
5 Mobility adjustment screw
Use this screw to set the mobility of the surgical microscope's swing
movement.
6 120° coupling
The 120° coupling improves ergonomic handling.
7 K 0/120 coupling
We recommend using the K 0/120 coupling for gynecological procedures.
This makes it possible to shift the working area downwards by 115 mm.
8 Securing screws
9 Adjustment screw for weight compensation
10 Mobility adjustment screw
You can use this screw to adjust the rotational mobility of the suspension
arm.
11 Mobility adjustment screw
You can use this screw to adjust the rotational mobility of the carrier arm.