ZEISS
4 Installation | 4.5 Connecting the Primostar 3 HD IP Camera to a Storage Medium or Imaging Device
4.5.3 Connecting to a Display (without PC)
The Primostar 3 HD IP camera can be connected to a monitor, TV or projector for visualization of
the live image data and for operating the On Screen Display menu (OSD) functions.
Prerequisite
ü
The monitor/projector supports 1080p and 4K HD formats.
ü
To enable the display in HD quality, it is recommended that only HD-capable devices be con-
nected.
ü
If connecting to a monitor, please use a monitor that supports 4K for live imaging at 4K reso-
lution (e.g. Monitor TFT 32" HP Z32)
ü
If a monitor/projector is used, an HDMI/DVI adapter cable or HDMI/DVI adapter will be re-
quired for the reproduction of image data.
Procedure
1. Connect the monitor/projector to the Primostar 3 HD IP camera using the HDMI cable.
2. Secure the HDMI plug on the jack of the monitor/projector.
3. Set the display device’s aspect ratio to 16:9 or Aspect.
4.5.4 Integrating the Primostar 3 HD IP Camera into a Network
The Primostar 3 HD IP camera is able to communicate and transfer data to network via Ethernet
port or Wi-Fi adapter and work with the
ZEISS Labscope
app.
A WLAN router will be required to use the built-in camera together with the
ZEISS Labscope
app.
An existing WLAN infrastructure or a separate microscope WLAN setup may be used.
To use an existing WLAN infrastructure, a High-performance 802.11n WLAN with sufficient free
bandwidth is required. In the event of an overloaded or slow WLAN the live image of the built-in
camera may be delayed or incorrectly displayed on the iPAD.
To create a separate microscope WLAN set up, visit
www.zeiss.com/micro-apps
for further in-
formation.
The integrated camera will identify itself automatically to the network on DHCP and will be auto-
matically recognized by
Labscope
, provided the iPAD is in the same network.
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en
61
