90
Description
G-30-1529-en
OPMI® VISU 160 on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 09. 10. 2006
Display field with control keys
The display and control panel is integrated in the control unit.
The surgical microscope on the suspension system can be controlled ei-
ther manually or electronically. The control software required for elec-
tronic control is installed in the electronics box of the suspension system.
You operate the software via the control and display panel, where you can
read off and reconfigure the current settings.
The control and display panel is structured as follows:
–
Three display fields (LCD) with the associated keys "
∇
" and "
∆
".
–
One row of keys comprising the MODE, STORE and MANUAL keys,
and a yellow LED above the MANUAL key.
User interface
The user interface of the suspension system comprises three display
fields and keys located beside and below them.
A pair of keys "
∇
" and "
∆
" has been assigned to every display field for
making the appropriate settings.
The control functions have been combined in several modes (menu
pages). The basic mode is always displayed in the normal operating
status.
The following is displayed in the basic mode:
–
the current lamp brightness of lamp 1 (halogen) in the upper display
field,
–
the current lamp brightness of lamp 2 (halogen) in the middle display
field,
–
the current lamp brightness of lamp 1 (xenon) in the upper display
field,
–
Xe for xenon in the middle display field,
–
the current user ID in the lower display field.
Note:
In the Superlux Eye illumination system with additional, integrated hal-
ogen illumination (option), the lamps are numbered as follows:
Lamp 1: xenon
Lamp 2: halogen
MODE
STORE MANUAL
USER
1
1
1.5
Basic mode
Halogen
MODE
STORE MANUAL
USER
1
1
1.5
2
1.5
Xe
Xenon
Xenon with hal-
ogen (option)
MODE
STORE MANUAL
USER
1
1
1.5
2
1.5