146
Preparations
G-30-1529-en
OPMI® VISU 160 on S8, S81 & S88 Suspension Systems
Issue 5.0
Printed on 09. 10. 2006
Settings on the control and display panel
Adjusting the suspension system
•
Turn on the suspension system at its power switch.
•
Successively select the following functions on the suspension system:
–
lamp brightness,
–
motor speeds for zoom,
–
focus and
–
X-Y coupling.
•
Set the lamp brightness as follows:
Start with the minimum brightness setting, and gradually increase the
brightness until the necessary and still admissible level has been
reached.
–
Xenon: adjustment range: 1 ... 10
•
Set the values required for
–
motor speeds of the functions zoom,
–
focus and
–
X-Y coupling.
Motor speed
Adjustment range: 1...10
Level 1 corresponds to the lowest, level 10 to the highest motor speed.